PICMG 1.3 CPU Card for 2xIntel Dual Core/Quad Core Xeon LGA771, with VGA/2xGbE LAN/2xSATA/6xUSB

Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.

 Jetzt anfragen!

 Main Features

    * Quad Core/Dual-Core Xeon® Processor SBC
    * Intel® 5000P Embedded Chipset with Longevity Support
    * Robust Mechanism Design for Enhanced Product Reliability
    * Up to 8GB ECC/Register FB-DIMM DDR 2 Memory
    * Dual PCI Express Gigabit Ethernet for High Networking Bandwidth
    * Four USB 2.0 Directly Output from Bracket to Save the Cabling Cost
    * Flexible Design for Single/Dual Processors
    * Dedicated CPU Cooler Design for Thermal Solution


 CPU Support    

    * Support Dual-Core Intel® Xeon® processor 5100 series and Quad-Core Intel® Xeon® Processor 5300 series (80W)
    * Intel® Embedded Processor List ( Intel® Longevity CPU): Dual-Core Intel® Xeon® Processor (5130 & 5140)Dual-Core Intel® Xeon® Processor LV (5128, 5138, 5148)
    * 1066/1333 MHz FSB support

Main Memory    

    * 4 x 240-pin four channel DDR 2 FB-DIMM
    * Support ECC/Register DDR2 memory up to 8GB


    * Intel® 5000P memory controller Hub
    * Intel® 6321ESB I/O controller Hub


    * AMI BIOS
    * Plug & Play support
    * Support Soft off, Wake on LAN, Power On by PS2 Keyboard Function Key, RTC alarm Power On
    * Power on after power failure
    * 8M-bit fl ash ROM

On-board LAN    

    * 2 x Intel® 82573L PCI Express Gigabit Ethernet
    * Support Boot From LAN (PXE)
    * Support Wake On LAN (When 5Vsb power available)
    * 2 x RJ45 with LED


    * ATI ES1000 PCI graphic Controller
    * 32MB DDR2 SDRAM VGA Memory
    * 1 x DB15 VGA port

I/O Interface    

    * USB 2.0: 4 ports through I/O bracket
    * USB 2.0: 2 ports, with 1x6 JST (2.5mm )
    * Serial port: 2 ports, with 2x5 box-header (2.0mm) support RS-232 only
    * Parallel port: 1 port , with 2x13 box-header (2.0mm), Bi-directional, EPP/ECP
    * PS/2: 1 x Mini-Din Keyboard/Mouse
    * GPIO: Support 4 sets of general purpose I/O each with TTL level (5V) interface
    * FAN: 2 x 4-pin FAN connectors (for CPU coolers)
    * 1 x on board buzzer
    * 1 x 2-pin power on switch / 1 x SMBus 2.0 to Backplane
    * 1 x 2-pin header for reset / 1 x 5-pin header for key lock
    * 1 x 2-pin header for power LED / 1 x 2-pin header for HDD LED

Watchdog Timer    

    * Watchdog Timer is programmable by software from 0 to 255 seconds (Tolerance 10% under room temperature 25°C)


    * SATA: 2 ports, support RAID 0,1 through Backplane
    * IDE: 1 x 40-pin IDE connector, support Ultra ATA 33/66/100
    * 1 x 2-pin JST (2.5mm) power connector for DOM (Disk On Module)

System Monitor    

    * 8 voltage (For +3.3V, +5V, Vcore x2, 1.8V, 1.5V, 5Vsb, and Vbattery)
    * 3 temperature (For 2 CPU and system)
    * 3 FAN speed monitor ( 2 for CPU and 1 for ESB2)

On-board RTC    

    * On-chip RTC with battery back up
    * 1 x External Li-Lon battery


    * PICMG 1.3 SHB, 338.58 mm (L) x 126.39 mm (W) (13.3" x 4.9")

Power Input    

    * Power source from backplane through PICMG 1.3 Golden Finger, support ATX mode-- CPU:2 x Dual-Core Xeon 3.0G, Memory:4 x FBD DDR2 2.0GB:+12V +5V +3.3V +5Vsb; Full-Loading Mode:21.4A 2.07A 3.85A 0.04A; Light-Loading Mode:10.59A 1.69A 3.63A 0.04A. (NOTE: 1.Full Loading: Utilize CPU 100% with Burn-in test running 2.Light Loading: Utilize CPU loading below 5% without data or application running)


    * Operating Temperature: 0°C ~ 60°C (for Board Level Only)
    * Storage Temperature: -20˚C to 85˚C
    * Relative Humidity: Operating: 10%~90% (non-condensing), Non-Operating: 5%~95% (non-condensing)


    * CE approval
    * FCC Class A

Nach oben