IDS-5012, Industrial 1-port RS232/422/485 to 2-port 10/100TX Device Server

IDS-5012 Industrial 1-port RS232/422/485 to 2-port 10/100TX Device Server Sonderpreis! Ab Lager

Artikelnummer
SP-IDS-5012
Hersteller
Intel
Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.


 Jetzt anfragen!

Übersicht

IDS-5012 ist ein innovativer 1 port RS232/422/485 zu 2 ports LAN server. Um die Verfügbarkeit und Sicherheit wichtiger Daten sicherzustellen, verfügt der IDS-5012 über zahlreiche features für HW & SW Funktionen.Sollte die Verbindung zwischen dem master-link und LAN einmal gestört werden, sokann der IDS-5012 innerhalb von 10ms automatischzu einem anderen LAN port umschalten und so eine ständige Verbindung sicherstellen.

IDS-5012 ünterstützt zudem switch mode. Der Anwender kann unter Anwendung von Daisy Chain die Abzahl der siwtches zwischen den Ethernet ports reduzieren. Außerdem kann der IDS-5012 Simultan Daten in 5 Host-PC´s übertragen.
Der IDS-5012 verfügt über ein duales Stromzufuhr System, einmal über Power Jack und einmal über terminal block.

Der IDS unterstützt die NAT Durchlassfunktion die es dem Anwender ermöglicht das System innerhalb und außerhalb des NAT Routers zu steuern. Es ist einfach für Anwender mit unterschiedlichen IP-Adressen den IDS zu benutzen.
Durch all das ist der IDS-5012 eine der besten Kommunikationslösung.

 

Features

  • Dual redundant Ethernet port support redundant mode (Recovery time < 10ms)
  • Ethernet switch mode enable Daisy Chain
  • Redundant 5 multiple host devices supported to protect your industrial network
  • Versatile modes & event alarm by e-mail
  • HTTPs & SSH protocol supported for secured management
  • NAT router pass through
  • IP table to prevent access from unauthorized IP address
  • Configurable by Web-based and Windows utility (DSTool)
  • Dual redundant DC power inputs of terminal block and power jack
  • Rigid IP-30 housing design
  • DIN-Rail and panel mounting enabled

 

 

 

 

Physical Ports

10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 2

 

Serial Ports
Connector DB9 x 1
Operation Mode RS232 / RS422 / 4(2)-Wire RS485. Which can be confi gured by DS-Tool
Serial Baud Rate 110 bps to 460.8 Kbps
Data Bits 5, 6, 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422 Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire) Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire) Data+, Data-,GND
Flow Control XON/XOFF, RTS/CTS, DTR/DSR

 

LED Indicators
Power Indicator PWR 1(2) / Ready :
  Red On : Power is on and booting up.
  Red Blinking : Indicates an IP confl ict, or DHCP or BOOTP   server did not respond properly.
  Green On : Power is on and functioning Normally.
  Green Blinking : Located by Administrator.
10/100TX RJ45 Port Indicator Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.
Serial TX / RX LEDs Red : Serial port is receiving data
Green : Serial port is transmitting data

 

Power
Redundant Input power Dual DC inputs. 12-48VDC on 3-pin terminal block and power jack
Power Consumption (Typ.) 4 Watts
Overload Current Protection Present

 

Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 72(W)x29.4(D)x123.4(H) mm (2.83x1.16x4.86 inch.)
Weight (g) 327 g

 

Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -10 to 60°C (14 to 140°F)
Operating Humidity 5% to 95% Non-condensing
Reverse polarity protection Present on terminal block

 

Regulatory approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty 5 years
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 2

 

Serial Ports
Connector DB9 x 1
Operation Mode RS232 / RS422 / 4(2)-Wire RS485. Which can be confi gured by DS-Tool
Serial Baud Rate 110 bps to 460.8 Kbps
Data Bits 5, 6, 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422 Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire) Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire) Data+, Data-,GND
Flow Control XON/XOFF, RTS/CTS, DTR/DSR

 

LED Indicators
Power Indicator PWR 1(2) / Ready :
  Red On : Power is on and booting up.
  Red Blinking : Indicates an IP confl ict, or DHCP or BOOTP   server did not respond properly.
  Green On : Power is on and functioning Normally.
  Green Blinking : Located by Administrator.
10/100TX RJ45 Port Indicator Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.
Serial TX / RX LEDs Red : Serial port is receiving data
Green : Serial port is transmitting data

 

Power
Redundant Input power Dual DC inputs. 12-48VDC on 3-pin terminal block and power jack
Power Consumption (Typ.) 4 Watts
Overload Current Protection Present

 

Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 72(W)x29.4(D)x123.4(H) mm (2.83x1.16x4.86 inch.)
Weight (g) 327 g

 

Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -10 to 60°C (14 to 140°F)
Operating Humidity 5% to 95% Non-condensing
Reverse polarity protection Present on terminal block

 

Regulatory approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty 5 years
Nach oben