nTUF 610, Intel® 2nd Generation Core i7-2610UE 1.5GHz Fanless Marine Computer

On-board Intel® 2nd Generation CoreTM i7-2610UE 1.5 Ghz 4x USB ports Dual M12 connector for Intel® 82574L GbE LAN ports 1x VGA display output 2x RS232 2x PS/2 for keyboard and mouse 1x external CFast socket 1x mini-PCIe with two antenna holes Support +24V DC power input Dual Cold Swappable 2.5” SSD tray Supports ATX power mode, WoL, LAN teaming and PXE function

nTUF 610 EOL
Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.

 Jetzt anfragen!

nTUF series stands for NEXCOM Tough Computer mainly for Marine Bridge and Control Room computing solution. The nTUF610 Marine Fanless Computer is based on Intel® 2nd Generation Core™ i7 platform providing the highest graphic and computing performance with versatile interfaces for Marine peripherals connection. The nTUF610 features with 4x USB2.0, 2x M12 GbE LAN port, 1x VGA, 1x DVI-D, 2x DB9 RS232, 2x PS/2, 1x CFast socket and two cold swappable 2.5” SSD trays on the front panel. In the rear side, the nTUF600 offers 4x Digital Input, 4x Digital Output and 4x NMEA ports with 2KV optical protection. The isolated 24V DC input in nTUF600 is designed for Marine applications followed by IEC60945 regulations.


CPU Support On-board Intel® 2nd Generation CoreTM i7-2610UE 1.5 Ghz 4M Cache Intel® QM67 PCH
Main Memory 1 x DDR3 SO-DIMM sockets, support up to 2 GB DDR3 1066/ 1333 SDRAM, un-buffered and non-ECC
I/O Interface-Front ATX power on/off switch HDD access/power status LEDs LAN1 & LAN2 Status LEDs 4x USB2.0 ports 2x M12 GbE LAN ports Intel® 82574L GbE LAN controller on board 1.5KV ESD/ surge protection 1x VGA output & 1x DVI-D display output 1x HDMI (only work when optional MXM 3.0 graphic module is installed) Audio jack (speaker-out & Mic-in) 2x antenna holes 2x DB9, RS232 2x PS/2 for keyboard & mouse 2x cold swappable 2.5” HDD tray 1x external screwed type CFast socket 3-pin +24V DC input 1x external fuse
I/O Interface-Rear 4x Digital Input: 6-pin screw terminals
Voltage level: 5V, TTL-level digital input
4x Digital Output: 8-pin screw terminals
36V DC with 100mA relay
4x NMEA interfaces
Signal: TX/RX signals
2KV optical isolation protection
Device 2x 2.5” SSD driver bay 1x external CFast socket 1x mini-PCIe socket
Default: support optional Wi-Fi module
Option: support optional 3.5G module
Power Requirements DC input range: 16V~30V DC input Nominal DC Input: +24V DC input with 1.5KV isolation protection Pin definition: Positive, Negative and Chassis Ground
Dimensions 294mm (W) x 200mm (D) x 100mm (H) (11.6”x 7.9”x 3.94”)
Construction Aluminum chassis with fanless design
Environment Operating temperature:
Ambient with air flow: -25°C ~ 55°C
(according to IEC60945, E10 and DNV standards)
Storage temperature: -20°C ~ 80°C Relative humidity: 10% to 93% (non-condensing)
Certifications IEC60945 (in process) IACS-E10 (in process) DNV 2.4 (in process)




The fan-less design and thermal solution on nTUF610 ensure the Marine Bridge System running smoothly and reliably. The front accessible interface design, swappable 2.5” SSD tray and screwed type CFast deliver the benefit of engineering-free and the ease of installation and maintenance. Powered by ® Core™ i7 platform, the superior computing and graphic performance enable the nTUF610 an ideal solution for Marine ECDIS Navigation applications.



    Nach oben