I-7570

I-7570 ~ NEW ~ Serial to HART Converter

Artikelnummer
I-7570
Hersteller
ICP DAS
Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.


 Jetzt anfragen!

The I-7570 is a Serial to HART converter designed as the master device of HART protocol. It allows users to access the HART slave by using RS-232 / RS-422 / RS-485. These HART slave devices may be a transmitter, actuator, current output device and so forth. In addition, by using the I-7570 utility tool, users can configure module and test HART communication easily and quickly.

 
  • Current Measuring
  • Petrochemical Industry Application
  • Environment Monitoring
  • Tunnel Monitoring
  • Monitor system
  • Building Monitoring
 
  • Support HART Short / Long frame
  • Support HART Burst mode
  • Support point-to-point or multi-drop HART mode
  • Support connecting up to 15 HART slave devices
  • Allow two HART masters
  • Provide utility tool for module configuration and HART communication
  • Provide PWR / TxD / RxD indication LED
  • Isolated COM 1: RS-232 / RS-422 / RS-485
  • 4KV ESD Protection
  • Built-in Watchdog
  • Selectable 250Ω load resistor
 
  • Search all HART devices automatically
  • Provide HART Universal & Common-Practice command (v6.0) for HART device configuration
  • Provide module configuration and HART communication easily and quickly
  • Provide data logging for HART communication

 
UART Interface
COM 1
RS-232(Tx / Rx / GND) / RS-422 / RS-485
COM 1 Connector
9-pin screwed terminal block
Baud Rate (bps)
1200 bps (For FW_v1.1)
1200 ~ 115200bps (For FW_v1.1 / HW_v1.2)
Data Format
O(odd parity), 8(data bit), 1(stop bit) (For FW_v1.1)
N/O/E(parity), 8(data bit), 1/2(stop bit) (For FW_v1.1 / HW_v1.2)
HART Interface
HART Interface
2-pin screwed terminal block
HART Channel
1
LED
Round LED
PWR / TxD / RxD
Power
Power supply
Unregulated +10 ~ +30 VDC
Protection
Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption
1 W
Mechanism
Installation
DIN-Rail or Wall Mounting
Dimensions
121 mm x 72 mm x 35 mm (H x W x D)
Environment
Operating Temp.
-25 ℃ ~ +75 ℃ (-13 to 167 )
Storage Temp.
-30 ℃ ~ +85 ℃ (-22 to 185 )
Humidity
5% ~ 95%, non-condensing
 
I-7570 CR
Serial To HART Converter (Gray Cover) (RoHS)

Nach oben