I-7540D-WF

I-7540D-WF ~ NEW ~ CAN to Wi-Fi Converter

Artikelnummer
I-7540D-WF
Hersteller
ICP DAS
Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.


 Jetzt anfragen!

The I-7540D-WF supports the wireless transmission of CAN data between various CAN networks or a CAN network and a WLAN network according to the 802.11b/g standard. The I-7540D-WF is highly suitable for connecting mobile (e.g., vehicles or machines) or stationary CAN networks and is often used for short ranges up to 100 m.(TCP data protocols are available.) Using an appropriately configured router, CAN data can be transmitted over the Internet. There are two operating modes in the I-7540D-WF: the access point mode and the ad-hoc mode. In the access point mode, the data connection takes place over one or several WLAN access points that are often part of the company's internal IT infrastructure. In the ad-hoc mode, a direct connection is established between a single I-7540D-WF device and a PC or laptop (with an integrated WLAN interface), or with a second I-7540D-WF device. In this way, The I-7540D-WFcan be used as a CAN diagnosis interface. The wireless connection that is established between two I-7540D-WF units can be used instead of a cable, and enables the connection of CAN networks that would otherwise be difficult to link such as rotational machinery.

 
‧Factory Automation
‧Building Automation
‧Home Automation
‧Control System
‧Monitor System
‧Vehicle Automation
 
  •  IEEE 802.11b/g compliant
  •  Wireless data transmission via WLAN
  •  Two different operation modes: infrastructure and ad-hoc
  •  point to point or point to multi-points connection via wireless LAN
  •  Supports WEP, WPA and WPA2 encryption for wireless LAN
  •  CAN 2.0A/2.0B compliant
  •  Connect CAN networks via a WLAN bridge
  •  Communication efficiency: one-way is up to 700 fps (client->server, server->client),two-way 350 fps (client<=>server)
  •  Wireless transmission distance: up to 100 meters
 
CAN Interface
Controller
CAN Controller inside
Transceiver
NXP 82C250
Channels
1
Connector
10-pin screw terminal connecter
Baud Rate (bps)
5K ~ 1Mbps
Isolation
3000 VDC power protection on CAN side, 2500Vrms photo-couple isolation on CAN bus
Terminator Resistor
Selectable 120Ω terminator resistor by jumper
Specification
ISO-11898-2, CAN 2.0A and CAN 2.0B
Max Data Flow
700 fps(peak value, one-way)
UART Interface
Connector
10-pin screw terminal connecter
COM1
RS-232(TXD, RXD, GND)
Baud Rate (bps)
115200
Wi-Fi Interface
Antenna
5 dBi (Omni-Directional)
Standard Supported
IEEE 802.11b/g
Operation Mode
Infrastructure & Ad-hoc
Encryption
WEP, WPA and WPA2
Frequency Ranges
2.412GHz ~ 2.484GHz
Transmission distance
Up to 100 meters
LED
Round LED
PWR / Wi-Fi / CAN / CNT / WLAN
Power
Power supply
+10 ~ +30 VDC
Protection
Reverse polarity protection, Over voltage protection, Over current protection
Power Consumption
1.5 W
Mechanism
Installation
DIN-Rail
Dimensions
117mm x 76mm x 37mm (H x W x D)
Environment
Operating Temp.
-25 ~ 75 ℃
Storage Temp.
-30 ~ 80 ℃
Humidity
10 ~ 90% RH, non-condensing
 
I-7540D-WF CR
CAN to Wi-Fi Converter (RoHS)
 
7/14 channel Surge Protector

Nach oben