I-2534

Artikelnummer
I-2534
Hersteller
ICP DAS
Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.


 Jetzt anfragen!

The I-2534 is one kind of CAN bus switch. There are four independent CAN channels which offer a flexible design of the start or tree network topology. This new topology could resolve the complex CAN bus application, like industrial machinery, building automation, vehicle automation, and etc. Furthermore the I-2534 integrates and exchanges data between different CAN network which has different baud rate. It helps users to extend the CAN network system. The I-2534 could increase the maximum CAN node count in a CAN network by splitting the CAN network into several subnets. In additional, the user-defined CAN baud rate and CAN filter configuration are also supported.

2533

 
• Control System• Building Automation• Factory Automation• Distributed data acquisition

 
  • 4 CAN communication ports
  • TJA1042 CAN transceiver
  • Compatible with CAN specification 2.0A and 2.0B
  • Fully compatible with the ISO 11898-2 standard
  • Baud rate : 5 k, 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 M bps and user-defined
  • CAN filter is configurable
  • CAN bus route path is configurable
  • 100 data frames buffer for each CAN channel
  • Max. data flow up to 2500 fps (frames per second) for all CAN channels
  • Selectable baud rate by rotary switch
  • Selectable 120Ω terminator resistor by DIP switch
  • LED for CAN status
  • Utility tool for CAN filter, route path and user-defined baud rate configuration
  • 2500 Vrms isolation on the CAN side
  • 3 kV galvanic isolation between the power supply and CAN channel
  • 4 kV ESD protection for each channel
  • Hi-PotSurgeEMI and EFT testing are all pass

 
Hardware
Controller
High Performance Microcontroller
RTC (Real Time Clock)
No
Watchdog
Watchdog IC
ESD Protection
4 kV Contact for each channel
CAN Interface
Transceiver
NXP TJA1042
Channel number
4
CAN Specification
ISO-11898-2, CAN 2.0A and CAN 2.0B
Baud Rate (bps)
5k, 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 M bps and user-defined
Baud Rate Selection
Selectable by rotary switch
Isolation
3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminator Resistor
Selectable 120Ω terminator resistor by DIP switch
Transmission Distance (m)
Depend on baud rate (for example, max. 1000 m at 50 kbps )
CAN Filter
Configurable by user
UART Interface
RS-232
1 port (for configuration)
RS-232 Connector
3-pin screwed terminal block (TxD, RxD, GND )
LED
Round LED
CAN status LED x 4 , Power LED x 1
Power
Input range
Unregulated +10 ~ +30 VDC
Power Consumption
3W
Mechanism
Installation
DIN-Rail
Casing
Flame-Resistant plastic case
Dimensions
32.3 mm x 99 mm x 77.5 mm (W x L x H)
Environment
Operating Temp.
-25 ~ 75 ℃
Storage Temp.
-30 ~ 80 ℃
Humidity
10 ~ 90% RH, non-condensing

2533

 
I-2534
Industrial 4-port CAN bus Switch

 
CA-0910-C
9-pin Female D-sub & 3-wire CAN bus cable (1M)
SG-770
7/14 channel Surge Protector
Nach oben