NS-205PFCS-60

NS-205PF Series/NSM-205PF Series 4-port 10/100 Mbps PoE (PSE) with 1 fiber port Switch

Artikelnummer
NS-205PFCS-60
Hersteller
ICP DAS
Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.


 Jetzt anfragen!

The NS-205PF/NSM-205PF is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports which are classified as power source equipments (PSE). The NS-205PF/NSM-205PF makes centralized power supply come true and provides up to 15.4 watts of power per PSE port. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 60 km) transmissions.

The NS-205PF-24V/NSM-205PF-24V series is designed with 24 VDC to 48 VDC boost for PoE application where 48 VDC power supply is not available.
  • Provides 1 x 100-FX fiber port plus 4 x Ethernet ports
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Store-and-forward architecture
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • 4 PoE ports with Power Sourcing Equipment (PSE) operation
  • Automatic MDI/MDI-X crossover for plug-and-play
  • Auto-detection of PD (powered devices) and automatic power management
  • Over-temperature, over-current and over/under-voltage detection
  • Supports operating temperatures from -30 ~ +75 °C
  • DIN-Rail Mounting

Models NS-205PF-24V NSM-205PF-24V NS-205PF NSM-205PF
PoE 802.3af
Input Voltage Rangeg +18 ~ 32 VDC +46 ~ +55 VDC
Operating Temperature -30 °C ~ +75 °C
Casing Plastic Metal (IP30) Plastic Metal (IP30)
Installation DIN-Rail Mounting
Dimensions (W x H x D)
(Unit: mm)
31 x 157 x 113 25 x 168 x 119 31 x 157 x 113 25 x 168 x 119

Models NS-205PF Series NSM-205PF Series NS-205PF-24V Series

NSM-205PF-

24V Series

Technology
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Addresses 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Ethernet Interface
RJ-45 Ports 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators Power, Link/Act, Power Device is detected
Ethernet Isolation 1500 Vrms 1 minute
+/-4 kV ESD Protection Yes
Fiber Interface (100 Base-FX; SC/ST type)
Multi-Mode NS-205PFT/FC
NSM-205PFT/FC
NS-205PFT-24V/FC-24V
NSM-205PFT-24V/FC-24V
Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm
Distance: 2 km, (62.5/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -20 dBm
Max. TX Output: -14 dBm
Max. RX Sensitivity: -32 dBm
Min. RX Overload: -8 dBm
Budget: 12 dBm
Single-Mode NS-205PFCS
NSM-205PFCS
NS-205PFCS-24V/FCS-24V
NSM-205PFCS-24V/FCS-24V
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 30 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -15 dBm
Max. TX Output: -8 dBm
Max. RX Sensitivity: -34 dBm
Min. RX Overload: -5 dBm
Budget: 19 dBm
Single-Mode NS-205PFCS-60
NSM-205PFCS-60
NS-205PFCS-60-24V/FCS-60-24V
NSM-205PFCS-60-24V/FCS-60-24V
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 60 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -5 dBm
Max. TX Output: 0 dBm
Max. RX Sensitivity: -35 dBm
Min. RX Overload: -5 dBm
Budget: 30 dBm
Power Input
Input Voltage Range +46 ~ +55 VDC for PoE output +18 ~ +32 VDC
Power Consumption 0.08 A @ 48 VDC without PD loading;
1.5 A @ 48 VDC with PD full loading
0.24 A @ 24 VDC without PD loading;
3.2 A @ 24 VDC with PD full loading;
4.6 A @ 18 VDC with PD full loading
Protection Power reverse polarity protection
+/-4 kV ESD Protection Yes
Connector 3-Pin Removable Terminal Block
PoE Technology
PoE Compliance 100% IEEE 802.3af compliant
PoE Classification PSE (Power Sourcing Equipment)
PoE Voltage +48 VDC depending on power input
PoE Voltage Up to 15.4 watts per channel
PoE Operation Automatic detection and power management
PoE Pin assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE disconnect mode DC disconnect
Mechanical
Casing Plastic
(Flammability UL 94V-0)
Metal (IP30 Protection) Plastic
(Flammability UL 94V-0)
Metal (IP30 Protection)
Dimensions (W x L x H) (Unit: mm) 31 x 157 x 113 25 x 168 x 119 31 x 157 x 113 25 x 168 x 119
Installation DIN-Rail Mounting
Environment
Operating Temperature -30 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Ambient Relative Humidity 10% ~ 90% RH, non-condensing

Nach oben