Industrial Smart Ethernet Switch with 8 10/100 Ba

8-port 10/100 Mbps Ethernet with 1 fiber port Switch

Artikelnummer
NS-209FC
Hersteller
ICP DAS
Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.


 Jetzt anfragen!

The NS-209F/NSM-209F is a 8-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 30 km) transmissions.

The NS-209F/NSM-209F provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.

  • Provides 1 x 100-FX fiber port plus 8 x Ethernet ports
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • Automatic MDI/MDI-X crossover for plug-and-play
  • Store-and-forward architecture
  • Supports operating temperatures from 0 ~ +70 °C

Models NS-209F Series NSM-209F Series
Technology
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward; wire speed switching
MAC Addresses 2048
Memory Bandwidth 2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Ethernet Interface
RJ-45 Ports 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators Power, Link/Act, 10/100M
Ethernet Isolation 1500 Vrms 1 minute
Fiber Interface (100 Base-FX; SC/ST type)
Multi-Mode NS-209FT/NS-209FC
NSM-209FT/NSM-209FC
Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm
Distance: 2 km, (62.5/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -20 dBm
Max. TX Output: -14 dBm
Max. RX Sensitivity: -32 dBm
Single-Mode NS-209FCS/NSM-209FCS Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 30 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -15 dBm
Max. TX Output: -8 dBm
Max. RX Sensitivity: -34 dBm
Power Input
Input Voltage Range +12 ~ +48 VDC (Redundant input) +12 ~ +48 VDC (Redundant input)
One relay output with current carrying capacity of 1 A @ 30 VDC
Power Consumption 0.26 A @ 24 VDC
Protection Power reverse polarity protection
+/-4 kV ESD Protection Yes
Connector 5-Pin Removable Terminal Block 7-Pin Removable Terminal Block
Mechanical
Casing Plastic (Flammability UL 94V-0) Metal (IP20 Protection)
Dimensions (W x L x H) 64 mm x 101 mm x 118 mm 73 mm x 105 mm x 132 mm
Installation DIN-Rail Mounting DIN-Rail Mounting or Wall Mounting
Environment
Operating Temperature 0 °C ~ +70 °C
Storage Temperature -20 °C ~ +85 °C
Ambient Relative Humidity 10% ~ 90% RH, non-condensing

NS-209FT CR Multi-mode, ST Connector, 8-port 10/100 Mbps with 1 fiber port Switch (RoHS)
NS-209FC CR Multi-mode, SC Connector, 8-port 10/100 Mbps with 1 fiber port Switch (RoHS)
NS-209FCS CR Single-mode 30 km, SC Connector, 8-port 10/100 Mbps with 1 fiber port Switch (RoHS)
NSM-209FT CR Multi-mode, ST Connector, 8-port 10/100 Mbps with 1 fiber port Switch; metal case (RoHS)
NSM-209FC CR Multi-mode, SC Connector, 8-port 10/100 Mbps with 1 fiber port Switch; metal case (RoHS)
NSM-209FCS CR Single-mode 30 km, SC Connector, 8-port 10/100 Mbps with 1 fiber port Switch; metal case (RoHS)
Nach oben