Industrial Smart Ethernet Switch, Multi-mode, SC

NS-205PF Series/NSM-205PF Series 4-port 10/100 Mbps PoE (PSE) with 1 fiber port Switch

Artikelnummer
NS-205PFC
Hersteller
ICP DAS
Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.


 Jetzt anfragen!

The NS-205PF/NSM-205PF is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports which are classified as power source equipments (PSE). The NS-205PF/NSM-205PF makes centralized power supply come true and provides up to 15.4 watts of power per PSE port. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 60 km) transmissions.

The NS-205PF-24V/NSM-205PF-24V series is designed with 24 VDC to 48 VDC boost for PoE application where 48 VDC power supply is not available.

  • Provides 1 x 100-FX fiber port plus 4 x Ethernet ports
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Store-and-forward architecture
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • 4 PoE ports with Power Sourcing Equipment (PSE) operation
  • Automatic MDI/MDI-X crossover for plug-and-play
  • Auto-detection of PD (powered devices) and automatic power management
  • Over-temperature, over-current and over/under-voltage detection
  • Supports operating temperatures from -30 ~ +75 °C
  • DIN-Rail Mounting

Models NS-205PF-24V NSM-205PF-24V NS-205PF NSM-205PF
PoE 802.3af
Input Voltage Rangeg +18 ~ 32 VDC +46 ~ +55 VDC
Operating Temperature -30 °C ~ +75 °C
Casing Plastic Metal (IP30) Plastic Metal (IP30)
Installation DIN-Rail Mounting
Dimensions (W x H x D)
(Unit: mm)
31 x 157 x 113 25 x 168 x 119 31 x 157 x 113 25 x 168 x 119

Models

NS-205PF Series

NSM-

205PF Series

NS-205PF

-24V Series

NSM-205PF

-24V Series

Technology

Standards

IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)

Processing Type

Store & forward; wire speed switching

MAC Addresses

1024

Memory Bandwidth

3.2 Gbps

Frame Buffer Memory

512 Kbit

Flow Control

IEEE 802.3x flow control, back pressure flow control

Ethernet Interface

RJ-45 Ports

10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection

LED Indicators

Power, Link/Act, Power Device is detected

Ethernet Isolation

1500 Vrms 1 minute

+/-4 kV ESD Protection

Yes

Fiber Interface (100 Base-FX; SC/ST type)

Multi-Mode

NS-205PFT/FC
NSM-205PFT/FC
NS-205PFT-24V/FC-24V
NSM-205PFT-24V/FC-24V

Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm
Distance: 2 km, (62.5/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -20 dBm
Max. TX Output: -14 dBm
Max. RX Sensitivity: -32 dBm
Min. RX Overload: -8 dBm
Budget: 12 dBm

Single-Mode

NS-205PFCS
NSM-205PFCS
NS-205PFCS-24V/FCS-24V
NSM-205PFCS-24V/FCS-24V

Single-mode fiber cables: 8.3/125, 8.7/125,

9/125 or 10/125 μm
Distance: 30 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -15 dBm
Max. TX Output: -8 dBm
Max. RX Sensitivity: -34 dBm
Min. RX Overload: -5 dBm
Budget: 19 dBm

Single-Mode

NS-205PFCS-60
NSM-205PFCS-60
NS-205PFCS-60-24V/FCS-60-24V
NSM-205PFCS-60-24V/FCS-60-24V

Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 60 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -5 dBm
Max. TX Output: 0 dBm
Max. RX Sensitivity: -35 dBm
Min. RX Overload: -5 dBm
Budget: 30 dBm

Power Input

Input Voltage Range

+46 ~ +55 VDC for PoE output

+18 ~ +32 VDC

Power Consumption

0.08 A @ 48 VDC without PD loading;
1.5 A @ 48 VDC with PD full loading

0.24 A @ 24 VDC without PD loading;
3.2 A @ 24 VDC with PD full loading;
4.6 A @ 18 VDC with PD full loading

Protection

Power reverse polarity protection

+/-4 kV ESD Protection

Yes

Connector

3-Pin Removable Terminal Block

PoE Technology

PoE Compliance

100% IEEE 802.3af compliant

PoE Classification

PSE (Power Sourcing Equipment)

PoE Voltage

+48 VDC depending on power input

PoE Voltage

Up to 15.4 watts per channel

PoE Operation

Automatic detection and power management

PoE Pin assignments

V+ (Pin 1,2), V- (Pin 3,6)

PoE disconnect mode

DC disconnect

Mechanical

Casing

Plastic
(Flammability UL 94V-0)

Metal (IP30 Protection)

Plastic
(Flammability UL 94V-0)

Metal (IP30 Protection)

Dimensions (W x L x H) (Unit: mm)

31 x 157 x 113

25 x 168 x 119

31 x 157 x 113

25 x 168 x

119

Installation

DIN-Rail Mounting

Environment

Operating Temperature

-30 °C ~ +75 °C

Storage Temperature

-40 °C ~ +85 °C

Ambient Relative Humidity

10% ~ 90% RH, non-condensing

NS-205PFT CR Multi-mode, ST Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS)
NS-205PFC CR Multi-mode, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS)
NS-205PFCS CR Single-mode 30 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS)
NS-205PFCS-60 CR Single-mode 60 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS)
NSM-205PFT CR Multi-mode, ST Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS)
NSM-205PFC CR Multi-mode, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS)
NSM-205PFCS CR Single-mode 30 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS)
NSM-205PFCS-60 CR Single-mode 60 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS)
NS-205PFT-24V CR Multi-mode, ST Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch (RoHS)
NS-205PFC-24V CR Multi-mode, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch (RoHS)
NS-205PFCS-24V CR Single-mode 30 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch (RoHS)
NS-205PFCS-60-24V CR Single-mode 60 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch (RoHS)
NSM-205PFT-24V CR Multi-mode, ST Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch; metal case (RoHS)
NSM-205PFC-24V CR Multi-mode, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch; metal case (RoHS)
NSM-205PFCS-24V CR Single-mode 30 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch; metal case (RoHS)
NSM-205PFCS-60-24V CR Single-mode 60 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch; metal case (RoHS)

DR-120-24 24V/5 A, 120 W Single Output Industrial DIN Rail Power Supply
MDR-60-24 24V/2.5A, 60 W Power Supply with DIN-Rail Mounting
MDR-60-48 48 V/1.25 A, 60 W Power Supply with DIN-Rail Mounting
DIN-KA52F-48 48 V/0.52 A, 25 W Power Supply with DIN-Rail Mounting
KA52F-48 48 V/0.52 A, 25 W Power Supply

Nach oben