Industrial Managed Layer 2 Ethernet Switch with 8

8-port Industrial Ethernet Layer 2 Managed Switch

Artikelnummer
MSM-508
Hersteller
ICP DAS
Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.


 Jetzt anfragen!

  • Automatic MDI/MDI-X crossover for plug-and-play
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Supports wide operating temperature -40 °C ~ +75 °C
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • 3.2 Gbps high performance memory bandwidth
  • Redundant Dual Power Inputs +12 VDC ~ +48 VDC
  • Power failure alarm by relay output
  • Frame buffer memory: 1 Mbit
  • 2048 MAC addresses
  • Store-and-forward architecture
  • DIN-Rail Mounting and Screw hole for wall mounting
  • Modbus remote monitoring
  • Supports Modbus OPC Server
  • Built-in Cyber-Ring redundant technique

The MSM-508 is an 8-port Industrial Ethernet (10/100 Base-TX) Layer 2 Managed Switch. MSM-508 supports 10/100M auto negotiation feature and auto MDI/MDI-X function. It can automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The connectors of Ethernet port are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation.

It can be managed through RS-232 port via serial console or Ethernet port using telnet or Web browser. In addition, the switch supports a lot of powerful managed functions, such as 802.1Q Tag-based VLAN, Portbased VLAN, 802.1p QoS (Quality of Service), Port Trunking, Spanning Tree, Cable Testing and Port Mirroring. Built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. Typically the switch detects and recovers from a copper link failure within approximately 20 ms – for the majority of applications a seamless process. Modbus/TCP, Modbus/RTU and OPC supported, SCADA application can monitor status of Ethernet port with Modbus or OPC protocol.

MSM-508 provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the it's power needs. And the relay output facility can deliver warning signal while power or network link failure.

Technology
Standards IEEE 802.3, 802.3u and 802.3x
Processing Type Store & forward, wire speed switching
MAC Addresses 2048
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Protocol VLAN, QoS, Port Trunk, SMTP, TELNET
Ethernet Interface
RJ-45 Ports 10/100 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators Power, Link/Act, 10/100M
Ethernet Isolation 1500 Vrms 1 minute
COM1 RS-232 (TxD, RxD and GND); Non-isolated
COM2 RS-485 (D2+, D2-; self-tuner ASIC inside); Non-isolated
Frame Ground for EMS Protection Yes
Digital Input/Output
Digital Input 3-channel, Wet Contact, L: +11 VDC Max., H: +19 VDC ~ +30 VDC
Digital Output 3-channel, Open Collector, Sink/NPN, 30V/100 mA Max.
Power
Input Voltage Range +12 ~ +48 VDC Redundant Dual Inputs (Non-isolated)
Power Consumption 0.25 A @ 24 VDC, +/-5% arrowed with 100M Full duplex
Protection Power reverse polarity protection
+/-4 kV ESD Protection Yes
Connection 20-Pin Removable Terminal Block
Mechanical
Casing Metal
Environmental Rating IP30 Protection
Dimensions (W x L x H) 47 mm x 128 mm x 175 mm
Installation DIN-Rail Mounting or Wall mounting
Environment
Operating Temperature -40 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Ambient Relative Humidity 10 ~ 90% RH, non-condensing
Accessories
Include Cable CA-090510 x 1

MSM-508 CR 8-port Layer 2 Managed Switch with metal casing (RoHS)

CA-090510 9-Pin Female D-Sub & RJ-45 Cable, 1 M Cable
MDR-20-24 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting
MDR-60-24 24V/2.5A, 60 W Power Supply with DIN-Rail Mounting
DIN-KA52F 24 V/1.04 A, 25 W Power Supply
DR-120-24 24 V/5 A, 120 W Power Supply with DIN-Rail Mounting

Nach oben