I-PEAK-735VL

PICMG Pentium 4 Socket-478 CPU Card w/VGA/LAN/2xSerial ATA

Artikelnummer
I-PEAK-735VL EOL
Hersteller
NEXCOM
Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.


 Jetzt anfragen!

END OF LIFE! Wenn Sie einen Nachfolger benötigen rufen Sie uns an: 04451 / 96113-200 

 

Main Features

    * Socket 478 for Intel® Pentium® 4 Processor up to 3.2 GHz with 400/533/800 MHz FSB
    * Intel® 865GV/ICH5 Chipset
    * 2 x 184-pin DIMM, supports DDR 266/333/400 SDRAM Memory up to 2GB
    * Intel® 82547EI GbE controller & Intel® 82551 QM Fast Ethernet Controller
    * 2 x Serial ATA Ports
    * 2 x USB 2.0 Ports



Specifications  CPU Support    

    * Intel® Pentium® 4 or Celeron® (D) processor in the mPGA478 package
    * FSB: 800/533/400MHz
    * CPU support up to 3.4GHZ (Intel® Desktop Processor and Up to 3.0GHZ (Intel® Embedded Processor)
    * Supports Hyper- Threading technology

Main Memory    

    * 2 x 184-pin DIMM, supports DDR 266/333/400 memory up to 2 GB
    * Dual 64-bit DDR channels, 3.2 GB/s bandwidth per channel
    * Supports un-buffered and non-ECC DIMMs only

Chipset    

    * Intel® 865GV (GMCH) (Intel® 865G for RoHS Version)
    * Intel® ICH5 (I/O controller Hub)

BIOS    

    * Award System BIOS
    * Plug & Play support
    * Advanced Power Management support
    * ACPI (Advanced Confi guration &Power Interface) support
    * 4 Mbit flash ROM

On-board LAN    

    * Intel® 82547EI Gigabit Ethernet controller (dedicated by CSA port directly from the Intel® 865GV GMCH) and 1 x Intel® 82551QM 10/100 Ethernet controller for PEAK 735VL2G
    * Single Intel® 82551QM 10/100 Fast Ethernet controller for PEAK 735VL
    * Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3y, IEEE 802.3ab
    * 2 x RJ45 with LED

Display    

    * Intel® 865GV (GMCH) chipset with integrated graphics controller
    * Hardware motion compensation assist for software MPEG/DVD decoding
    * Access system memory
    * 1 x 15-pin CRT connector

I/O Interface    

    * 2 x On-board USB port, USB 2.0 compliant
    * Ultra ATA 100/66/33 support, 2 x 40-pin connector, 2-pin power connector for DOM (Disk On Module)
    * Serial ATA support, 2 x SATA connector, data transfer bandwidth up to 150 MB/s
    * ITE 8712F-A Super I/O
    * 2 x SIO , with 16C550 UARTs, 10-pin header
    * 1 x PIO, bi-directional, EPP/ECP support, 26-pin connector
    * Floppy disk controller: 1 x 34-pin connector
    * 1 x 6-pin mini DIN connector , for PS/2 Keyboard/Mouse, 1 x 5-pin connector (for external keyboard)
    * 1 x On-board buzzer
    * GPIO (4 in, 4 out)
    * 1 x On-board 2-pin header for I2C
    * 1 x On-board 5-pin header for IrDA
    * On-board 2-pin header for reset SW, 4-pin for speaker, 5-pin for keylock, 2-pin for IDE active LED, 2-pin ATX power SW
    * One 3-pin power header for 3-pin power cable connect to backplane board to support ATX power on function
    * On-board 4-pin additional power source input

Watchdog Timer    

    * Watchdog timeout can be programmed by software from 1, 2, 4, 8, 16, 32,...256 seconds

On-board RTC    

    * On-chip RTC with battery back up
    * 1 x External Li Battery

ISA Support    

    * ITE 8888F x 1 PCI to ISA Bridge
    * Provides 64 mA high driving capability to maximize ISA signals and supports up to 20 ISA cards on the backplane ISA Slot

System Monitor    

    * Derived from Super I/O ITE 8712F-A to support system monitor
    * 8 voltage (For+1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and +5 Vsb)
    * 2 fan speed (one is for CPU, one is for system)
    * 2 temperature (one is for internal CPU, one is for external system)
    * 2 temperature sensor (one is for internal CPU, one is for external system)

Power Requirements    

    * CPU : 3.0 GHz
    * +12 V: 6.5 A
    * +5 V: 5.4 A
    * +3.3 V: 0.5 A
    * +5 Vsb: 0.5 A
    * CPU : 2.4 GHz
    * +12 V: 4.5 A
    * +5 V: 4 A
    * +3.3 V: 0.5 A
    * +5 Vsb: 0.5 A

Dimensions    

    * 338.58 mm (L) x 122 mm (W) (13.3" x 4.8")

Environment    

    * Board level operating temperature: 0°C to 60°C
    * Storage temperature: -20°C to 80°C
    * Relative humidity: 10% to 90% (Non-condensing)

Certifications    

    * CE approval
    * FCC Class A

Nach oben