I-PEAK-715VL-HT, PICMG Pentium 4 HT Socket-478 CPU Card w/VGA/LAN

I-PEAK-715VL-HT, PICMG Pentium 4 HT Socket-478 CPU Card w/VGA/LAN ***EOL**** es ist nur noch PEAK-715VL2-HT ab Lager lieferbar!

Artikelnummer
PEAK-715VL-HT
Hersteller
NEXCOM
Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.


 Jetzt anfragen!

 Main Features

    * Intel® Pentium® 4 up to 3.06 GHz with 400/533 MHz FSB, Hyper-Threading Technology or Intel® Pentium® 4-M
    * Intel® 845GV/ICH4 Chipsets
    * 184-pin DIMM x 2, Supports DDR 266/333 SDRAM Memory up to 2GB
    * Integrated VGA with 64 MB Shared Memory
    * 1 x Intel® Gigabit Ethernet with 1 or 2 x Intel® 10/100 LAN
    * 4 x USB 2.0 port


Specification

 CPU Support    

    * Socket 478 for Intel® Pentium® 4 / Celeron® processor up to 3.06 GHz and greater with 400/533 MHz FSB
    * Supports Hyper-Threading technology
    * Supports Intel® Pentium® 4-M processor up to 2.4 GHz and greater with 400 MHz FSB

Main Memory    

    * 2 x 184-pin DIMM, up to 2 GB Unbuffered Non-ECC DDR 200/266/333 SDRAM memory

Chipset    

    * Intel® 845GV
    * 1 x Intel® 82801DB I/O Controller Hub (ICH4)

BIOS    

    * Award System BIOS
    * Plug & Play support
    * APM (Advanced Power Management) support
    * ACPI (Advanced Confi guration &Power Interface) support
    * 4 Mbit flash ROM

On-board LAN    

    * 2 x Intel® 82551QM 10/100 Fast Ethernet controllers for PEAK 715VL2-HT
    * Full duplex compliance with IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE 802.3y, IEEE 802.3ab
    * 2 x RJ45 with LED connector

Display    

    * Intel 82845GV chipset integrated VGA controller
    * 64 MB of VGA system memory

I/O Interface    

    * Built-in ITE 8712F-A Super I/O chipset
    * 4 x USB 2.0 port
    * HDD: 2 x 40-pin connector. Ultra DMA 33/66/100 support
    * Serial port: 2 port with 2x5 pin header
    * Parallel: 1 x 26-pin connector, supports EPP/ECP
    * FDD: 1 x 34-pin connector
    * Video: 1 x 15-pin CRT connector
    * PS/2 Keyboard/Mouse: 1 x 6-pin Mini-DIN connector
    * External keyboard: 1 x 5-pin connector
    * 1 x Buzzer
    * GPIO (4 in, 4 out)
    * I2C: 1 x 2-pin header
    * Reset SW: 1 x 2-pin header
    * IDE active LED: 1 x 2-pin header
    * ATX power SW: 1 x 2-pin header
    * Power cable connected to backplane board to support ATX power on function: 1 x 3-pin power header
    * Additional power source input: 1 x 4-pin header
    * I/O On Bracket: 1 x VGA DB-15 connector, 2 x RJ45 Ethernet LAN port, 1 x Mini-DIN for Keyboard/Mouse

Watchdog Timer    

    * Programmable Watchdog timer from 1 ~ 128 seconds

On-board RTC    

    * On-chip RTC with battery back up
    * 1 x External Li-Ion battery

Disk On Module    

    * HDD: 2 x 40-pin connector; Ultra DMA 33/66/100 support
    * IDE active LED: 1 x 2-pin header

ISA Support    

    * ITE 8888F x 1 PCI to ISA Bridge
    * Provides 64 mA high driving capability to maximize ISA signals and supports up to 20 ISA cards on the backplane ISA Slot

System Monitor    

    * Derived from Super I/O ITE 8712F-A to support system monitor
    * 8 voltage (For+1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and Vcc 5 V standby)
    * 2 fan speed (one is for CPU, one is for system)
    * 2 temperature (one is for internal CPU, one is for external system)

Power Input    

    * Power source from backplane through PCI/ISA golden finger
    * Supports both AT or ATX power supplies
    * +3.3 V is converted from +5 V and not directly from backplane or power supply
    * +5 Vsb (standby power) is connected from backplane through 3-pin connector
    * 4-pin +12 V power input connector

Power Requirements    

    * Power supply maximum consumed power on SBC:
    * 5 V: 4 A
    * 12 V: 6.5 A
    * 3.3 V: 0.6 A
    * 5 Vsb: 0.5 A

Dimensions    

    * 338.58 mm (L) x 122 mm (W) (13.3" x 4.8")

Environment    

    * Operating temperature: 0°C to 60°C
    * Storage temperature: -20°C to 80°C
    * Relative humidity: 10% to 90% (Non-condensing)

Certifications    

    * CE approval
    * FCC Class A

Nach oben