I-PEAK-870GC

PICMG 1.3 Intel Core 2 Duo LGA775 CPU Card with VGA/GbE LAN/4xSATA/4xUSB, w/o Audio

Artikelnummer
I-PEAK-870GC
Hersteller
NEXCOM
Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.


 Jetzt anfragen!

 Main Features

    * Intel® LGA775 Core™ 2 Duo/Pentium® 4/Pentium® D/Celeron® D
    * Processors with 533/800 MHz
    * Supports Dual Channel Non-ECC DDR2 533/667 MHz up to 4GB
    * 1 x 82573L PCI Express Gigabit Ethernet LAN
    * 4 x SATA, 8 x USB 2.0, 2 x COM , 1 x Parallel , 1 x Floppy
    * Intel® 945GC GMCH Integrated Intel® GMA 950, Max 128 MB of DVMT for Graphics Memory Allocation
    * Analog Display Supports up to 2048 x 1536 at 85 Hz for CRT


Specifications

 CPU Support    

    * Support Intel® LGA775 Core™ 2 Duo/Pentium® 4/Pentium® D/Celeron® Dprocessors
    * Intel® Embedded Processor List ( Intel® Longevity CPU): Intel® Core™2 Duo Processor E4300 & E2160 Intel® Pentium® 4 Processor 651 & 551 & 531 Intel® Celeron® D Processor 352 & 341 Intel® Celeron® Processor 440
    * 533/800 MHz FSB support

Main Memory    

    * 2 x 240-pin DIMM, for up to 4GB dual channel Non-ECC DDR2 533/667 SDRAM
    * Note: Maximum 4GB. Actual memorey size is dynamic based on the OS I/O resource allocation

Chipset    

    * Intel® 945GC +ICH7 (PEAK 870GC)

BIOS    

    * Award System BIOS
    * Plug & Play support
    * Advanced Power Management and Advanced Configuration & Power Interface support

On-board LAN    

    * 1 x Intel® 82573L PCIe Gigabit Ethernet Controllers
    * Supports Boot from LAN

Display    

    * Intel® 945G GMCH Integrated Intel® GMA 950, Max 128 MB of DVMT for graphics memory allocation
    * Analog display support up to 2048 x 1536 @ 85 Hz for CRT

Audio    

    * AC’ 97 Audio Codec, Realtek ALC655
    * 3 x (1x4 pin header) for Line in/Line out/MIC in

I/O Interface    

    * USB 2.0: 8 ports (4 on board, 4 to backplane)
    * Serial port: 2 port, with 2x5pin headers
    * IDE: 1 x 40-pin connector. Support Ultra ATA 100/66/33
    * Disk on Module: 1 x 2-pin power connector for DOM
    * SATA HDD: 4 ports,Support RAID 0.1
    * Parallel port: 1 x 26-pin connector
    * Floppy: 1 x 34-pin connector
    * GPIO: Supports 4 sets general purpose I/O each with TTL level (5 V) interface
    * On-board buzzer / 2-pin power on button switch
    * SMBus 2.0 to backplane
    * On-board 2-pin header for reset / 4-pin for PC speaker
    * 5-pin for key lock/power LED / HDD Power LED
    * 1 x 4-pin fan connector (for CPU); 2 x 3-pin fan connectors (for System)
    * 1 x 5-pin JST connector for chassis or backplane front Keyboard/Mouse
    * I/O On SBC Bracket: 1 x VGA DB-15 connector; 2 x RJ45 Gigabit Ethernet LAN port; 1 x PS/2 Keyboard/Mouse

Watchdog Timer    

    * 1-minute increments from 1 to 255 minutes
    * 1-second increments from 1 to 255 seconds
    * On-chip RTC with battery backup
    * 1 x External Li-lon battery

System Monitor    

    * 8 voltages (For +1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and +5 Vsb)
    * 2 temperature
    * 3 fan speed monitors

Dimensions    

    * PICMG 1.3 SHB 338.58mm (L) x 126.39mm (W) (13.3" x 4.9")

Power Input    

    * Power source from backplane through golden finger
    * Supports both ATX or BTX power supplies
    * 4-pin +12 V power input connector:CPU:2 x Core 2 Duo (E6700) 2.66G, Memory: 2 x DDR2 533Mhz 1GB: +12V +5V +3.3V +5Vsb; Full-Loading Mode:4.43A 3.42A 0.63A 0.03A; Light-Loading Mode 2.48A 3.12A 0.65A 0.03A. (NOTE:1.Full Loading: Utilize CPU 100% with Burn-in test running.2.Light Loading: Utilize CPU loading below 5% without data or application running)

Environment    

    * Board level operating temperature: 0°C to 60°C
    * Storage temperature: -20°C to 80°C
    * Relative humidity: 10% to 90% (Non-condensing)

Certifications    

    * CE approval
    * FCC Class A

Nach oben