ZB-2060-T wireless 6-ch Isolated Digital Input and 4-ch Relay Output Module

ISM 2.4 GHz Operating Frequency, Fully Compliant 2.4 G IEEE802.15.4/ZigBee Specifi cations, Wireless Transmission Range up to 700 m (ZB-2550P/ZB-2570P), Wireless Transmission Range up to 100 m (ZB-2550/ZB-2570), GUI Configuration Software (Windows Version), 6 Digital Input & 4 Relay Ouutput, Supports 16-bit Counters for Digital Inputs, Surge and ESD Protection, DIN-Rail Mount

Artikelnummer
ZB-2060-T
Hersteller
ICP DAS
Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.


 Jetzt anfragen!

 

The ZB-2000 series is a family of wireless Zigbee network data acquisition and control modules that support Modbus RTU and DCON protocols. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/ HMI software and PLC. It has the same form factor as the I-7000 series.

 

Specification

Digital Input
Input Channel6
Input TypeIsolated, Wet Contact (Sink/Source)
Input levelOn Voltage Level: +3.5 VDC ~ +30 VDC
Off Voltage Level: +1 VDC max.
Input Impedance3 kΩ, 0.33 W
CounterChannels: 6
Max. Count: 16-bit (65535)
Max. Input Frequency: 100 Hz
Min. Pulse Width: 5 ms
Relay Output
Output Channels4
Output TypePower Relay, Form A
Contact Rating5 A @ (250 VAC/30 VDC)
Max. Contact voltage270 VAC/125 VDC
Operate Time10 ms max. at rated voltage
Release Time5 ms max. at rated voltage
EnduranceElectricallyResistive Load: 100,000 ops. min. (10 ops/minute)
MechanicallyAt No Load: 20,000,000 ops. min. 300 ops/minute)
Dielectric StrengthBetween Contacts750 VAC for 1 minute
Between Coil to Contacts3,000 AC for 1 minute
Insulation Resistance5,080 V (1.2/50 μs)
Surge Strength5 ms max. at rated voltage
ESD Protection+/-4 kV (Contact for each channel)
Communication Interface
WirelessZigBee, IEEE 802.15.4 Standard
Antenna2.4 GHz-3 dBi Omni-Directional ante
ProtocolsSupports DCON and Modbus RTU Protocols
Hot SwapBy Rotary and DIP switch
LED Indicators
Power1 LED, red
ZigBee Communication1 LED, green
Digital Input & Output10 LEDs, green
Power
Power Consumption1.2 W max. 
Mechanical
FlammabilityFire Retardant Materials (UL94-V0 Level)
Dimensions (W x L x H)33 mm x 87 mm x 107 mm
InstallationDIN-Rail
Environment
Operating Temperature-25 °C ~ +75 °C
Storage Temperature-30 °C ~ +80 °C
Humidity10 ~ 90% RH, non-condensing

 

ZigBee Modul

RF channels16
Receive sensitivity-102 dBm
Transmit power3.7 dBm
Network Topology supportStar, Mesh and cluster tree
Antenna (2.4 GHz)3 dBi Omni-Directional antenna
Transmission range (LOS)100 m

 

Ordering information

ZB-2060-T CR   Wireless 6-ch Isolated Digital Input and 4-ch Relay Output Module (RoHS)
Important Note: The ZigBee AIO modules need a ZB-2570 to coordinate the data transmission route, please remember to also order a ZB-2570 when you purchase the ZB DIO products.
Nach oben