ZB-2060 wireless 6-ch Isolated Digital Input and 4-ch Relay Output Module

ISM 2.4 GHz Operating Frequency, Fully Compliant 2.4 G IEEE802.15.4/ZigBee Specifi cations, Wireless Transmission Range up to 700 m (ZB-2550P/ZB-2570P), Wireless Transmission Range up to 100 m (ZB-2550/ZB-2570), GUI Configuration Software (Windows Version), 6 Digital Input & 4 Relay Ouutput, Supports 16-bit Counters for Digital Inputs, Surge and ESD Protection, DIN-Rail Mount

Artikelnummer
ZB-2060
Hersteller
ICP DAS
Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.


 Jetzt anfragen!

The ZB-2000 series is a family of wireless Zigbee network data acquisition and control modules that support Modbus RTU and DCON protocols. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/ HMI software and PLC. It has the same form factor as the I-7000 series.

Specification

Digital Input
Input Channels 6
Input Type Isolation, Wet contact (Sink/Source)
Input level On Voltage Level: +3.5 VDC ~ +30 VDC
Off Voltage Level: +1 VDC max.
Input Impedance 3 kohm, 0.33 W
Counter Channels: 6
Max. Counts : 16-bit (65535)
Max. Input Frequency: 100 Hz
Min. Pulse Width: 5 ms
Relay Output
Output Channels 4
Output Type Power Relay, Form A
Contact Rating ( 250 VAC/30 VDC) @ 5 A
Max. Contact voltage 270 VAC/125 VDC
Operate Time 10 ms max. at rated voltage
Release Time 5 ms max. at rated voltage
Endurance Electrically Resistive load: 100,000ops. min. (10 ops/minute)
Mechanically At no load: 20,000,000ops. min. (300 ops/minute)
Dielectric Strength Between contacts 750 VAC for 1 minute
Between coil to contacts 3,000 VAC for 1 minute
Insulation Resistance 5,080 V (1.2 / 50us)
Surge Strength 5ms max. at rated voltage
ESD Protection 4 kV contact for each terminal
LED Display
1 LED as Power Indicator
1 LED as Zigbee Communication Indicator
10 LEDs as Digital Input and Output Indicators
Communication Interface
Wireless ZigBee, IEEE 802.15.4 Standand
Antenna 2.4 GHz-3 dBi Omni-Directional antenna
Protocols Supports DCON and ModBus RTU Protocols
Hot Swap By Rotary and DIP Switch
Power
Required Supply Voltage +10 to +30 VDC
Power Consumption 1.2 W max.
EFT Protection +/- 4 kV to Power
Surge Protection +/- 3 kV to Power
Dimensions
Case Plastic
Flammability UL 94V-0 materials
Dimensions 33 mm x 107 mm x 78 mm (W x H x D)
Installation DIN-Rail
Environment
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +75 °C
Relative Humidity 5% ~ 95% RH, Non-condensing

ZigBee Modul

RF channels 16
Receive sensitivity -102 dBm
Transmit power 9 dBm
Network Topology support Star, Mesh and cluster tree
Antenna (2.4 GHz) 3 dBi Omni-Directional antenna
Transmission range (LOS) 100 m

Ordering information

ZB-2060 CR    Wireless 6-ch Isolated Digital Input and 4-ch Relay Output Module (RoHS)

Important Note: The ZigBee DIO modules need a ZB-2570/ZB-2550 to coordinate the data transmission route, please remember to also order a ZB-2570/ZB-2550 when you purchase the ZB DIO products.

Nach oben