IEEE 802.3 10 Base-T
IEEE 802.3u 1000 Base-T
IEEE 802.1p Class of Service
IEEE 802.1Q Quality of Service
ITU-T G.993.2 VDSL2

Store and Forward technology with 64 ~1792 bytes packet forwarding ability

384Kbits

2K with 300 Sec agent time

4 Packet forwarding queues with 1 (Lowest):4 (Low):8 (High):15 (Highest) WRR (weighted round robin) forwarding schematics

VLAN tag priority, IPv4 packet precedence and IPv6 ToS.

Fast Ethernet: 200 packet / per sec. @ 100Mbps; 20 packet / per sec. @ 10Mbps

1x 10/100Mbps Fast Ethernet port with Auto MDI/MDI-X function
Auto-Negotiation
1x Line for ISDN/POTS
1x VDSL2

10/100 Base-TX: RJ-45 with auto MDI/MDI-X, Auto-Negotiation
ISDN/POTS: RJ-11
VDSL2: RJ-11

RJ-45 Fast Ethernet port: Cat.4,5, 2 pairs UTP cable, up to 100 meters
VDSL2: 1pairs of UTP cable, up to 3000 feet.
Line: Integrated ISDN/POTS

DIP-1 (Mode selection): On (Master) / Off (Slave)
DIP-2 (Impulse protection):On (Interleave)/ Off (Fast) ; Interleave mode with less than 250ms forwarding latency, Fast mode is less than 2ms forwarding latency.
DIP-3 (Rate Control): On (Non-Symmetric )/ Off (Symmetric)
DIP-4 (SNR Control): On (6dB)/ Off (9dB)
300bps to 921.6Kbps

Ssytem Power: Power on (Green on)
Fast Ethernet Port: Speed (100 Mbps: Yellow On), Link/Activity(Green)(On:10 or 100 Mbps Link up, Blinking: Packet is on transmitting)
Master (Green On): Device operating under Master Mode
VDSL Link/ Negotiation (Green): On/ Link, Blinking/Negotiation

DC Jack: 12~48V, 3-pin, Ø 2mm Center Pin
Terminal block: DC 12~48V, 3-Pin terminal block with earth ground. Power input with polarity reverse protection.

5Watts @DC 24V(Maximum)

Wall Mount or DIN-Rail mount

Aluminum metal case

29mm (H) x 88mm(W) x 114mm (L)

-25 to 70°C

0% to 90% (Non-condensing)

-40 to 80°C

0%~ 90% non-condensing

Ethernet port AC 1.5KV for port to power

FCC Class A; CE/EN55022 class A

IEC 61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8

IEC60068-2-27

IEC60068-2-6