VTC 1010, Intel® Atom™ E3827 Fanless In-Vehicle Computer

IIntel® Atom™ processor E3827, 1.75GHz, Dual SIM cards + dual WWAN modules support, Wide operating temperature -30°C- 70°C, Built-in U-blox 6 GPS, optional Dead Reckoning support, Built-in CAN 2.0B. Optional OBDII function (SAE J1939/ J1708), 4x mini-PCIe rich expansion capability, Wake on RTC/ SMS via WWAN module, Compliant with MIL-STD-810G, Built-in UBX-G6010 GPS, optional Dead Reckoning support

Artikelnummer
VTC 1010-BK
Hersteller
NEXCOM
Gewerbliche Kunden: Preis bitte anfragen
Shopbestellung nach Registrierung möglich.
Wenn Sie keine Preise sehen, lassen Sie sich bitte vom Kundensupport die Reseller-Preise freischalten.


 Jetzt anfragen!

NEXCOM’s in-vehicle computer, VTC 1010, provides the performance, reliability and scalability required to build a connected vehicle that can address the needs of fleet management. Based on the Intel® Atom™ processor E3800 product family (formerly codenamed "Bay Trail"), VTC 1010 features wide operating temperature range, dual WWAN and SIM, built-in GPS with optional dead-reckoning, intelligent vehicle power management and four mini-PCIe expansions. in-vehicle computer VTC 1010 can deliver the telematics technology for real-time voice and data communication, vehicle tracking and navigation, mobile video surveillance as well as in-vehicle infotainment.

 

 

CPU Intel® Atom™ processor E3827, Dual Core 1.75GHz
Memory 1 x 204-pin DDR3L SO-DIMM socket support 1066MHz/ 1333MHz up to 8GB. Default 2GB
Storage 1 x 2.5" SATA 2.0 1 x external accessible SD card socket
Expansion 1 x full size Mini-PCIe socket (USB 2.0) 1 x full size Mini-PCIe socket (USB 2.0+ PCIe) 1 x full size Mini-PCIe socket (mSATA or PCIe) 1 x half size Mini-PCIe socket (USB 2.0 + PCIe)
Function 1 x default U-blox UBX-G6010 GPS module (50-channel and GALIELO) or optional modules with Dead Reckoning or GLONASS support Built-in G-sensor, Gyroscope, and e-Compass sensors
I/O Interface-Front 8 x LED for power, system status, storage, WWAN, WLAN, GPS, LAN, GPIO 2 x external accessible SIM card socket (selectable) with cover 1 x audio jack 3.5mm for WWAN voice communication, including 1 x Mic-In and 1 x Line-Out 1 x external accessible SD card socket with cover 1 x event button (trigger type) 1 x reset button 1 x type A USB 3.0 compliant host, supporting system boot up
I/O Interface-Rear 1 x 9~36VDC input with ignition and 11W typical power consumption 1 x type A USB 2.0 compliant host, supporting system boot up 1 x RJ45 10/100/1000 Fast Ethernet with LED 1 x phone jack 3.5mm for 1 x Mic-In (for WWAN voice communication) 1 x phone jack 3.5mm for 1 x Line-Out (for PC audio) 1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz 1 x DP port. Resolution up to 2560 x 1600 @60Hz 1 x DB-9 for RS-232 4 x antenna hole for GPS/ WWAN/ WLAN/ B 1 x LHF 60-pin connector
    1 x 6-pin power connector, 12VDC output (max: 1A)
    1 x type A female USB 2.0 compliant host, supporting system boot up
    1 x DB-9 RS-232
    1 x DB-9 RS-422/ 485
    1 x DB-9 female 3 x DI and 3 x DO. On board CAN 2.0B signals
    (Programmable Digital Input)
      Input Voltage (Internal Type): 5VDC TTL (default)
      Input Voltage (Source Type): 3~12VDC
    (Programmable Digital Output)
      Digital Output (Sink Type): 5VDC TTL (default), max current: 20mA
      Digital Output (Source Type): 3~24VDC, max current: 250mA
    1 x DB-9 for optional ODBII module (ASE J1939 or J1708)
    1 x DB-9 for optional GPS Dead Reckening module
    4 x BNC connector Video-In for optional 4-channel video capture card
    4 x audio connector for 7.1 channel audio output
    (front, center/ woofer, rear surround, side surround)
Power Management Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/ off delay time by software Status of ignition and low voltage can be detected by software Support S3/ S4 suspend mode
Operating System Windows 8 Professional, WES8 Windows 7, WES7 Tizen IVI Fedora
Dimensions 180 mm (W) x 180 mm (D) x 50 mm (H) (7.09" x 7.09" x 1.97") 1.7kg
Environment Operating temperatures:
-30°C to 70°C (w/ industrial SSD) with air flow
-20°C to 50°C (w/ commercial HDD) with air flow
Storage temperatures: -35°C to 85°C Relative humidity: 10% to 90% (non-condensing) Vibration (random): 1g@5~500 Hz (in operation, SSD) Vibration (SSD):
Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
Shock (SSD):
Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Certifications CE approval FCC Class B E13 Mark
Nach oben